Akshar Electronics

Other Details:

Anemometer Cup Counter is manufactured as per IS : 5912 : 1970 for measuring wind velocity. The Cup Counter Anemometer measures the run of wind past the Instrument over a period.Our Anemometers are robustly constructed using powder coated Copper cups, gunmetal casting body, mechanical counter and stainless steels enabling them to withstand continuous exposure to the weather including marine environments.This instrument measures total run of wind passing at the point of observation through Mechanical Counter of the range 0 to 9999.9 km.

Specifications:

Range: 0 to 9999.99Scale : knots, mph or km/hOperating Temperature: -40°C to +100°CWeight: 3.4 kgResolution: 0.01Start Threshold: 3 knotsDimensions: 270 mm (Height), 228 mm (Axis to Outer Cup Edge), 127 mm (Cup Diameter).Fixing Details: ½" BSP internal.

• Self Recording Rain Gauges are manufactured as per IS:5225 :1969.

• Rain Gauge is manufactured from non corrosive fiber glass reinforced plastic container.

• Recording raingauges are used to obtain a continuous record of daily or weekly rainfall
• It consists of a funnel-shaped collector at the top of the gauge and a float syphon chamber and recording mechanism just below it
• The rain water collected by the collector is led into the float chamber
• The float is having a central stud on which a pen assembly is fixed
• The pen is moving over a daily chart wound over a clock drum
• After every 10 mm of rainfall syphoning occurs and recording of rain starts afresh

• Stevenson screens are manufactured as per IS:5948:1970 and are suitable for housing thermograph, hydrograph, dry and wet bulb, Thermometer and Maximum-Minimum Thermometer
• It avoids direct sunlight on Thermometer & also avoids effect of direct wind flow

• Basically these are manufactured from best quality Indian wood and accurately assembled with side louvers and supplied available in two sizes: Small size and Large size

• Wind Vane is manufactured as per IS:5799:1970 which indicates the direction of wind at the point of observation.

• It is used to analyse the wind flow during year & researches. It is also used in hazardous chemical industries to determine emergency run away side.

• Our Wind vanes are robustly constructed using powder coated aluminium body for light weight & enabling them to withstand continuous exposure to the weather including marine environments.

• A tipping bucket rain gauge is used for measurement of rainfall. It measures the rainfall with a least count of 0.5 mm. Rain Gauge consists of Fiberglass body & twin buckets mounted on a horizontal shaft
• It has two stable positions. The collector area of the rain gauge is 324 cm2
• Thus a volume of 32.4 cm3 corresponds to 1 mm of rainfall. The rainfall collected by the receiver reaches to one of the twin bucket through a funnel
• The weight of rain in bucket causes the tilting of the bucket from position to another position and brings the other bucket under the funnel for collecting water
• Every time the bucket tilts the small magnet attached to the horizontal shaft of the bucket actuates a reed switch generating one electric pulse
• Facility for leveling the bucket and proper calibration are also provided in the Tipping Bucket Rain Gauge

• The pulses are counted by Digital Datalogger & stored along with Date & Time in its internal Memory. The stored data can be downloaded to PC in Datasheet format & analyze it using any spreadsheet software.

• Models : 0.5 mm / 0.01 inch per tip.

• This instrument is manufactured as per IS:5901 - 1970.
• The instrument consists of a temperature sensitive Bimetallic element., in the form of S flat script or HLIX, connected by a system of Magnifying linkage to a recording pen moving on a chart which is fixed on a drum driven by clockwork available with mechanical clock.
• The movement is transmitted to the pen point and recorded on a chart fixed on a revolving clock drum.