Akshar Electronics

Electromagnetic flow meters (mag meters) are used to measure the flow of conductive liquids in a variety of industrial settings, including water and wastewater treatment, chemical processing, and mining. They excel at measuring slurries, dirty water, and corrosive liquids, making them suitable for applications where traditional flow meters might struggle. 

Turbine flow meters are used to measure the flow of liquids and gases in a wide range of industries, including oil and gas, water and wastewater, chemical processing, and aerospace. They are particularly suited for applications where accurate volumetric measurements and high pressure and temperature resistance are needed. 

Most electromagnetic flowmeters feature a meter size of 15 to 200 millimetres and a velocity range between 0.3 to 10 meters per second. The larger a flowmeter's size, the higher its velocity capacity and the greater the flow rate it can measure.

A minimum of 5 to 10 pipe diameters of straight run upstream and 1 to 2 diameters downstream is recommended. In vertical pipe runs, flow should always run up and not down. These flow meters are very sensitive to air bubbles.

These mechanical water flow meters work by measuring the speed of flowing water running through the pipe that causes a turbine or piston to rotate. The volumetric flow rate of the water is proportional to the rotational speed of the blades.

Specifications

Most electromagnetic flowmeters feature a meter size of 15 to 200 millimetres and a velocity range between 0.3 to 10 meters per second. The larger a flowmeter's size, the higher its velocity capacity and the greater the flow rate it can measure.

Most electromagnetic flowmeters feature a meter size of 15 to 200 millimetres and a velocity range between 0.3 to 10 meters per second. The larger a flowmeter's size, the higher its velocity capacity and the greater the flow rate it can measure.